USB Soldering Iron Set 8W Adjustable Temp Ceramic Core & 4 TIPS

Simple operation

1. Install the soldering iron, do not fully tighten the soldering iron tip.

2. Plug in the cable.

3. For the first time, you need to press the switch 6 times to turn it on.

4. Press the button to switch the temperature mode. They are green (low temperature around 100-180°C), blue (200-300°C), and red (300°C+). The red gear is easy to burn out the soldering iron tip if it is used for a long time, so it is generally used for preheating. Please use the blue gear for maintenance and welding.

1. The power supply current should be greater than 1.7A. If the power supply current is insufficient, unit will enter protection mode and cause the light on the switch to flicker uncontrollably. 2. If the soldering iron tip is too tight, a short circuit will occur, and the light on the switch will flicker uncontrollably.

Notice：Do not tighten the soldering iron tip too tightly, otherwise it may cause the soldering iron tip not to heat up.

Product instruction use:

1: press and hold the switch key for 2 seconds to start, the green index lamp temperature is 330-350°C

2: switch by single press, blue index lamp temperature is 370-400°C.

3: switch by single press, red index lamp temperature is: 430°C-450°C.

Quick power in

Simply plug in to any USB power supply – charger, USB outlet, PC laptop, etc, from any power supply of DC voltage 5 volts.

Note: plug in the power to use soldering iron – no battery. 

Technical parameters:

model : 5v 8w

power:8-10w

adjust temperature range: 330-450℃

Tin melting time: <15s

Auto sleep time: 10 Min

Cooling down: <30S

Package list:

1: soldering iron 1pc

2: soldering tip 4 pcs

3: USB power cable 1 pc

4: soldering iron station 1pc with cleaning pad

5: soldering  tin wire 1pc

6: user manual 1pc in foam packaging and box

Question:

Is there a battery inside the soldering iron?

Answer:

NO, There’s no battery inside the soldering iron.

If soldering iron without a wire connected, it does not work.